How To Install Gutter Under Drip Edge

  1. Measure the length of your gutter run and cut the gutters to size.
  2. Install hangers at the appropriate intervals along the length of the gutter.
  3. Suspend the gutters from the hangers and position them so that the lip of the gutter is flush with the drip edge of the roof.
  4. Secure the gutters in place with screws or nails.
  5. Install downspouts at the end of each gutter run and secure them in place.
  6. Test the gutters by pouring a bucket of water into them and ensure that the water flows freely through the system and into the downspouts.

Does gutter go under drip edge?

There is a lot of debate on whether or not gutters should go under the drip edge on a roof. Many roofing professionals believe that gutters should never be placed under the drip edge because it can cause premature deterioration of the roof and the gutter system. They believe that the drip edge is there to protect the roof and the gutter system should be installed above it. However, there are also many roofing professionals who believe that gutters can be installed under the drip edge without any problems.

How does a drip edge work with a gutter?

A drip edge is a metal strip that is installed on the edge of a roof. The purpose of a drip edge is to keep water from running behind the gutters. A drip edge also provides a place for the water to drip off of the roof so that it does not run down the sides of the house.

Can you install gutter apron and drip edge?

Most homes have some kind of gutter system to protect them from water damage. But what happens when that system breaks or becomes clogged? Water can build up and seep into your home, causing all sorts of problems.

Luckily, it’s relatively easy to install gutter apron and drip edge. This will help ensure that your gutters are functioning properly and keeping water away from your home.

Gutter apron is a strip of metal or other material that is installed under the shingles and over the gutter. It helps to direct water into the gutter and keeps it from seeping behind the gutter and into your home.

Drip edge is a strip of material that is installed along the edges of your roof. It helps to direct water away from your home and into the gutter.

Installing gutter apron and drip edge is a relatively simple process. First, you’ll need to remove the old gutter apron and drip edge. You can do this by prying it off with a crowbar or similar tool.

Once the old apron and drip edge are removed, you’ll need to clean the area. This will help ensure that the new apron and drip edge are installed properly.

What goes under the drip edge?

The drip edge is a vital component of any roofing system. It is a strip of material, usually metal, that is installed along the edges of the roof. The drip edge helps to keep water from seeping under the shingles and causing damage to the roof deck or the home itself.

How do you stop water leaks between drip edge and gutters?

  1. Inspect your gutters and drip edge for any cracks, holes, or gaps.
  2. If you find any damage, use a sealant or caulk to fill in the gaps and seal the cracks.
  3. Make sure that your gutters are properly installed and secured to your home.
  4. Inspect your downspouts and ensure that they are clear of debris.
  5. If you have any trees near your gutters, trim back any branches that may be causing damage.
  6. Regularly clean your gutters to prevent any buildup of debris.

Do you put ice & water under drip edge?

There are a few schools of thought on this one. Some people believe that putting ice and water under the drip edge will help to cool the shingles and prolong their life. Others believe that it is unnecessary and can actually cause the shingles to deteriorate faster. Ultimately, it is up to the homeowner to decide what they feel comfortable with.

How do you stop a leak between drip edge and gutter?

  1. Inspect the joint between the drip edge and gutter to see if there is any visible damage or debris. If there is, use a putty knife or other sharp object to scrape away any loose material.
  2. Apply a bead of silicone sealant or another type of sealant to the joint.
  3. Use a putty knife or your fingers to smooth out the sealant so that it is evenly distributed.
  4. Allow the sealant to dry for the amount of time specified on the product label.


If you’re looking to install a gutter under your drip edge, there are a few things you’ll need to do. First, you’ll need to measure the length of your drip edge and cut your gutter to size. Next, you’ll need to install hangers on your gutter and attach it to your fascia. Finally, you’ll need to connect your downspouts to your gutter to complete the installation.