How To Install Hidden Gutter Hangers On A House With No Fascia Board

  1. If your house doesn’t have a fascia board, you’ll need to install hidden gutter hangers.
  2. To do this, first measure the width of your gutters and mark the center point on the back of the gutter.
  3. Then, using a drill and a 1/4″ bit, create a pilot hole at the center mark. Next, insert a hidden gutter hanger into the pilot hole and secure it with screws.
  4. Repeat this process for each gutter section, making sure that the hangers are spaced evenly.
  5. Once all of the hangers are in place, you can then install your gutters.

How do you hang gutters without a fascia board?

  1. In order to hang gutters without a fascia board, you will need to use a hanger that is specifically designed for this purpose. There are a few different types of hangers that can be used, but the most common is the strap hanger.
  2. To install a strap hanger, simply nail or screw it into the gutter at the desired location. Make sure that the hanger is securely attached to the gutter so that it does not come loose.
  3. Once the hanger is in place, you can then hang the gutter from it. Be sure to use a level to ensure that the gutter is level before attaching it to the hanger.
  4. Finally, once the gutter is hung, you can then attach the downspout. Make sure that the downspout is properly secured to the gutter so that it does not come loose.

Do you need fascia board for gutters?

There is no one-size-fits-all answer to this question, as the amount of fascia board needed for gutters will vary depending on the size and type of gutter system being installed. However, in most cases, some form of fascia board will be required in order to properly install gutters. This is because fascia board provides a solid surface for the gutters to be attached to, and without it, the gutters would simply hang loose from the roof. In some cases, the fascia board may also be used to help support the weight of the gutters, although this is not always necessary.

How do you install hidden gutter brackets?

  1. Determine the location of the gutter brackets.
  2. Place the bracket against the fascia board at the determined location.
  3. Use a drill to create pilot holes in the bracket.
  4. Drive screws into the pilot holes to secure the bracket to the fascia board.
  5. Hang the gutter on the bracket.
  6. Repeat steps 2-5 for each additional bracket.

Can you hidden gutter hangers?

Yes, you can hidden gutter hangers. There are a few ways to do this, but the most common is to use a hanger that is designed to be hidden. There are several companies that make these hangers, so you should be able to find them at your local hardware store. Another way to hidden gutter hangers is to use a hanger that is designed to be installed on the underside of the gutter. This is a less common method, but it can be done.

What can I use as a fascia board?

One option for a fascia board is to use a piece of 1×6 lumber. This lumber is wide enough to provide good support for the gutters and is also easy to install. Another option is to use a piece of 2×4 lumber. This lumber is more sturdy and will provide better support for the gutters.

What is the difference between a soffit and a fascia board?

A fascia board is the trim that covers the ends of the rafters or the exposed ends of the roof trusses. A soffit is the material that covers the underside of the eaves. The fascia provides a finished look to the edge of the roof and the soffit helps to prevent animals and pests from entering the attic.

Can you install gutters on rafter tails?

Yes, you can install gutters on rafter tails, but there are a few things you need to keep in mind. First, the gutters need to be properly secured so that they don’t blow away in high winds. Second, you need to make sure that the gutters are pitched properly so that water can drain properly. Third, you need to be careful not to block the rafter tails when you install the gutters.


If your house doesn’t have a fascia board, you can still install hidden gutter hangers. You’ll need to use hangers that are made specifically for houses without fascia boards. These hangers will attach to the roof or soffit and will hold the gutters in place. Follow the instructions that come with the hangers to install them properly.