What Are Some Common Mistakes That People Make When Installing Gutters?

One of the most common mistakes people make when installing gutters is not properly measuring the length of the gutters needed. Another common mistake is not making sure the gutters are level before attaching them to the house. Also, many people forget to seal the joints between the gutters and the downspouts, which can lead to leaks.

What should you not do when installing gutters?

  1. Don’t use the wrong type of gutter. Make sure you know the difference between K-style gutters and half-round gutters, and choose the right one for your home.
  2. Don’t install gutters without a slope. Gutters must be installed with a slight slope (typically about 1/4 inch per 10 feet) so that water can drain properly.
  3. Don’t use the wrong size of gutters. Gutters come in a variety of sizes, and you need to choose the right size for your home.
  4. Don’t forget to install gutter hangers. Gutter hangers are essential for keeping your gutters in place, so make sure to install them before you start putting in the gutters.
  5. Don’t try to install gutters by yourself. Gutters are best installed by a professional, so unless you’re confident in your ability to do it yourself, leave it to the experts.

What is the most common problem with gutters?

The most common problem with gutters is that they become clogged with leaves and other debris. When this happens, water can no longer flow freely through the gutter system and can instead back up onto the roof or down the sides of the house. This can cause serious damage to the gutters, the roof, and the foundation of the home.

How do you tell if gutters are installed correctly?

  1. Look for any gaps or separations in the gutter system. These can be caused by loose fasteners, improper installation, or damage.
  2. Check the slope of the gutters. They should be installed with a slight slope (approximately 1/4 inch per 10 feet) so that water can drain properly.
  3. Inspect the downspouts to make sure they are securely attached and free of debris.
  4. Look for any signs of leaks, such as water stains on the fascia board or dripping from the joints.
  5. Make sure the gutters are clean and free of leaves, twigs, and other debris. Clogged gutters can cause water to back up and overflow, which can damage your home.

Should drip edge be tight to fascia?

There are a few schools of thought on this one. Some say that the drip edge should be installed as tight to the fascia as possible in order to create a barrier against water infiltration. Others believe that there should be a small gap between the drip edge and the fascia in order to allow any water that does get behind the drip edge a place to escape. Ultimately, it comes down to personal preference and what you feel comfortable with.


There are a few common mistakes that people make when installing gutters. One is not properly securing the gutters to the fascia board. This can cause the gutters to pull away from the house and eventually fall off. Another mistake is not properly slope the gutters. This can cause water to pool in the gutters and eventually overflow.