A splash block is a concrete or plastic device used to divert rainwater from the base of a downspout. The purpose of a splash block is to protect the foundation of a building by channeling water away from the structure. Splash blocks come in a variety of sizes, but the most common size is 8 inches wide by 16 inches long.
What is the typical size of a splash block?
There is no definitive answer to this question as splash blocks come in a variety of sizes. However, the average size of a splash block is between 12 and 18 inches wide and 12 to 24 inches long. Splash blocks are typically made from concrete, although other materials such as plastic or metal can also be used. The size of splash block you need will depend on the size of your gutters and the amount of rainfall your area receives.
How long should a splash block be?
A splash block is a small concrete block that is placed under the end of a downspout to keep water from splashing onto the ground or foundation.
- Splash blocks should be at least 6 inches wide and 18 inches long.
- The block should be placed so that the water from the downspout flows away from the foundation.
- Splash blocks can be placed on top of the ground or on a concrete pad.
- If the ground is not level, the splash block should be placed on a concrete pad.
- If the downspout is longer than 18 inches, multiple splash blocks can be used.
What can I use instead of splash blocks?
Splash blocks are commonly used to prevent water damage near the foundation of a home. However, there are a few different things that can be used in place of splash blocks. One option is to use a piece of PVC pipe that is cut to fit snugly against the side of the house. This pipe can be attached to the gutter system and will allow water to flow away from the foundation. Another option is to use a concrete or stone block that is slightly elevated off the ground. This will allow water to flow underneath the block and away from the foundation.
What are the different types of splash blocks?
Solid splash blocks are the most basic type of splash block. They are simply a concrete block that is placed under the downspout to catch runoff water and direct it away from the foundation. While solid splash blocks are the most basic type, they are also the most effective at preventing erosion and protecting foundations.
Perforated splash blocks are similar to solid splash blocks, but they have one or more holes drilled in them. These holes allow water to seep through the block and into the ground, which helps to prevent erosion. Perforated splash blocks are also effective at directing runoff water away from foundations.
Corrugated splash blocks are the most advanced type of splash block. They are made of a corrugated plastic that is very durable and effective at directing runoff water away from foundations. Corrugated splash blocks are also effective at preventing erosion.
Are concrete splash blocks good?
There are a few pros and cons to using concrete splash blocks. They are relatively inexpensive and easy to install. Concrete splash blocks also last a long time and are not susceptible to rot or insect damage. However, concrete splash blocks can be heavy and difficult to move if you need to make repairs to your gutters or downspouts. They can also crack or chip if hit with a heavy object.
Conclusion
There is no standard splash block size, as they come in a variety of sizes to fit different needs. However, most splash blocks are around 18 inches wide and 36 inches long.
